The Air Force 4™ Inflator, has a powerful built-in motor that allows for fast inflation on all four outlets. For the inflation of 16 inch and larger latex balloons, use the large balloon inflation hose included with the unit. To install this hose, simply remove one of the friction fit outlets and attach the hose to the port. Four latex balloons can be inflated at the same time with the friction fit outlets. Inflation can be controlled with the foot pedal, or by using the continual mode. The continual mode blows air out the outlets. The continual mode should not be run for more than 30 minutes without a 10 minute cooling period. The Air Force 4™ Inflator does not precisely size balloons, so it is up to the user to determine when to remove the balloon from the outlet. The Air Force 4™ has a safety fuse that shuts off the power, in the event of an electrical malfunction.
The Air Force 4 Includes (instruction included with kit):
– 4 Friction Fit Outlets
– 3 Extension Tips (to inflate 5 inch and entertainer balloons excluding 160Q balloons)
– 1 Foot Pedal
– 1 Power Cord
– 1 Large Balloon Inflation Hose (inflates 16 inch and larger latex balloons)
Use to Inflate
- Quick Links or Link-O-Loons
- Geo Blossoms
- Geo Donuts
- Hearts
- Orbz Balloons
- 260Q, 321Q, 350Q, 646Q, 660Q (260Q balloons require the use of an extension tip)
- Latex balloons from 5 inches to 36 inches (5 inch balloons require the use of an extension tip)
- Cloudbuster Balloons
Instructions Provided by Manufacturer
