EZ Safety Seal®, made by Creative, is a fast efficient way to seal helium-filled balloons.
Before inflating balloons place the EZ Safety Seal® into the neck of a latex balloon. Place the end of the EZ Safety Seal® onto the helium nozzle, and inflate the balloon. The nozzle you will need to use will be determined by the size of the balloon.
Small EZ Safety Seal® valves should be used on 9-inch to 12-inch latex balloons. Large EZ Safety Seal® valves should be used on 14-inch, 16-inch, and 17-inch latex balloons.
Creative’s Big Barrel EZ Safety Seal® valves self-seal helium balloons in six seconds. Big Barrel EZ Safety Seal® valves fit 9-inch to 12-inch latex balloons.
Balloons with an EZ Safety Seal® can be reused by pulling the seal out of the balloon and releasing the helium. The seals have a 4-foot pre-attached ribbon that should be pulled down once the balloon is inflated.
©05.10.22J
