The Snap-On Soft-Touch™ Push Valve Outlet, attaches easily to the quick-disconnect fitting on all of Conwin’s 10 feet Extension Hose Inflators, and the new Precision Plus Quick-Change Inflator. Conwin's line of snap on outlets makes it easy and efficient to switch between outlets, without having to thread a new outlet into the cylinder each time.
The Soft-Touch™ Push Valve Outlet, inflates both latex and foil balloons. Conwin suggests that foil balloons be inflated slowly and then removed from the outlet, while there are still some creases along the seam. If you are inflating latex balloons, place the neck of the balloon over the outlet and inflate until the desired size is reached. When using the Push Valve, press the outlet straight down. Use the extension tip (included) to inflate 5 inch, 260Qs, and valved latex balloons. Remove the extension tip to inflate 9 inch and larger latex balloons.
Warnings: This outlet does not come with an auto shut-off. You need to control the helium when inflating a foil balloon. Stop inflating once the foil balloon still has wrinkles along the seam. Stop at your desired size for latex balloons.
Use to Inflate
- Foil Balloons
- Bubble Balloons
- Valved Latex Balloons (requires use of extension tip)
- Quick Links
- Geo Blossoms
- Geo Donuts
- Hearts
- Orbz Balloons
- 260Q, 321Q, 350Q, 646Q, 660Q (260Q balloons require the use of an extension tip)
- Latex Balloons from 5 inches to 36 inches (5 inch balloons require the use of an extension tip)
